Universal Accessories

A full range of universal accessories are available to support the DPH, PB and BC pedestal ranges.

Rubber Shim

The rubber Shim is made in EPDM of 1 or 2mm reinforced (Shore 60). Placed on the Buzon pedestal it stabilises the paver, provides additional acoustic values, and because it can be split, it compensates for variations in paver thickness.

For use with marble, stone slabs, granite pavers, porcelain etc for:

• added anti-slip performance
• shock and sound absorption
• compensation for stone thickness variation

Rubber Protector Pads

The rubber protector pads are made of recycled rubber and are available in 3mm and 5mm formats. When placed under the pedestal, the pads protect the roof if required. They can also be used to raise the pedestal by 3mm or 5mm plus provides additional comfort.

The Buzon Bubble

The Buzon Bubble Level is an essential tool if using the Buzon slope correction system.

The Buzon Bubble Level measures the value and direction of the slope in any location where a Buzon pedestal is located. This information is essential for the use of our correction systems and slope control.

Buzon Alurail

The Buzon ALUrail system for outdoor raised floors allows for a simple and cost effective solution for all external terrace applications.

The system can be used for various substrates, 20mm porcelain, concrete and natural stone pavers. Practical and functional, the ALUrail system can be used where the void is limited. The system, including the Buzon Pedestal range starts at 29mm.

The system includes adjustable height supports in polypropylene, reinforced aluminium profiles and 3mm space tabs which allow for free drainage to the podium or WPM.

The ALUrail comes in 2 heights; 18mm and 38mm, a width of 65mm, and lengths of 2400mm.
Either side of the ALUrail are 2 rubber pads for the paver to sit on, offering a noise dampening feature. In between the rubber pads is a continuous recessed gap for the 3mm spacer tab to lock into, providing drainage between pavers.

The ALUrail is powder coated in black, therefore not noticeable between the paving slabs. (Silver rails are noticeable). This, combined with the Buzon pedestals, rubber pads and spacer tab, will prove to be a ‘hidden’ system.

The ALUrail is an ideal addition where tight datums are required, cantilevering or spanning awkward areas or equipment (i.e. ducting, air conditioning trays and pipes, power ducting, cable trays etc).


The ALUgrate aluminium drainage system is discreetly fixed to the timber or ALUrail joist using a hidden clip system, or surface fixed between the vanes.

Designed to mirror a DURADECK deckboard (hardwood or composite) and the Alfresco Floors range of 20mm external grade porcelain paving.

The purpose of grating requirements is to remove splash-back issues from water hitting the decking or paving, and in turn onto the doors or facade. The special geometry of the ALUgrate allows it to ‘trap’ rainwater, which then falls directly onto the WPM or insulation layer.

The length of the ALUgrate is 4000mm, offering a seamless installation, whereas traditional grating is typically 1200mm.

DPH/BC/PB End For Porcelain Tiles

The DPH/BC/PB End finishing kit wraps the edge of the space created beneath the deck installed on Buzon pedestals. Two blades with claws encircle the 20mm thick tiles.

This new accessory is available for use across the DPH / PB and BC Buzon pedestal ranges.